Braun Intertec Corporation
Bloomington,
Minnesota
View Accreditation Certificate
Michael
Kelly II
Attention: Materials Lab
11001 Hampshire Avenue South
Bloomington
,
Minnesota
55438
Phone: (952) 995-2000
Fax:
mkelly@braunintertec.com
http://www.braunintertec.com
26-3299 : Accreditation has been suspended for Pozzolan standard(s) T129, T137, C185, C187, C441
Quality Management System - accredited since 3/15/1990
R18, C1077 (Aggregate), C1077 (Concrete), C1093 (Masonry), C1222 (Cement), D3666 (Aggregate), D3666 (Asphalt Mixture), D3740 (Soil), E329 (Aggregate), E329 (Asphalt Mixture), E329 (Concrete), E329 (Masonry), E329 (Soil), E329 (Sprayed Fire-Resistive Material)
Asphalt Mixture - accredited since 3/15/1990
R47, R68, T30, T164, T166, T209, T245, T269, T283, T308, T312, T329, D2041, D2172, D2726, D2950, D3203, D3549, D4867, D5444, D6307, D6925, D6926, D6927
Soil - accredited since 3/15/1990
R58, T88, T89, T90, T99, T100, T180, T191, T193, T208, T215, T216, T236, T265, T267, T296, T297, T310, D421, D422, D698, D854, D1140, D1556, D1557, D1883, D2166, D2216, D2434, D2435, D2487, D2488, D2850, D2974, D3080, D4318, D4546, D4718, D4767, D5084, D6913, D6938, D7928
Aggregate - accredited since 3/15/1990
R76, R90, T11, T19, T21, T27, T37, T84, T85, T96, T104, T112, T113, T176, T255, T304, T335, CRD-C130, C29, C40, C88, C117, C123, C127, C128, C131, C136, C142, C295, C535, C566, C702, C1252, D75, D546, D2419, D4791, D5821
Sprayed Fire-Resistive Material - accredited since 4/1/2011
E605, E736
Concrete - accredited since 3/15/1990
M201, R39, R60, R100 (Beams), R100 (Cylinders), R115, T22, T24 (Testing Drilled Cores of Concrete), T97, T119, T121, T148, T152, T160, T161, T177, T196, T197, T198, T231 (7000 psi and below), T276, T277, T303, T309, T325, T347, C31 (Beams), C31 (Cylinders), C39, C42 (Testing Drilled Cores of Concrete), C78, C138, C143, C157, C172, C173, C174, C192, C215, C231, C293, C305, C403, C457, C469, C495, C496, C511, C567, C597, C617 (7000 psi and below), C642, C666, C672, C805, C856, C873, C876, C918, C939 (Pre-Mixed), C942 (Pre-Mixed), C1064, C1074, C1090, C1105, C1140 (Obtaining and Testing Specimens), C1152, C1202, C1218, C1231 (7000 psi and below), C1260, C1293, C1383, C1542, C1567, C1581, C1583, C1609, C1611, C1621
Cement - Physical Tests - accredited since 11/8/2012
M201, R71, R115, T105 (Loss on Ignition - Reference), T106, T107, T129, T131, T133, T137, T153, T154, T160, T186, T192, C109, C114 (Loss on Ignition - Reference), C151, C157, C183, C185, C187, C188, C191, C204, C266, C305, C430, C451, C511, C596, C1012, C1437
Pozzolan - Physical Tests - accredited since 11/13/2015
M201, R115, T106, T107, T133, T160, T192, C109, C151, C157, C188, C305, C311 (Loss on Ignition), C430, C511, C1012, C1437
Cementitious Material - Chemical Tests - accredited since 12/8/2023
T105 / C114 (Aluminum Oxide – X-Ray Fluorescence)
T105 / C114 (Calcium Oxide – X-Ray Fluorescence)
T105 / C114 (Ferric Oxide – X-Ray Fluorescence)
T105 / C114 (Loss on Ignition – Reference)
T105 / C114 (Magnesium Oxide – X-Ray Fluorescence)
T105 / C114 (Manganic Oxide – X-Ray Fluorescence)
T105 / C114 (Phosphorus Pentoxide – X-Ray Fluorescence)
T105 / C114 (Potassium Oxide – X-Ray Fluorescence)
T105 / C114 (Silicon Dioxide – X-Ray Fluorescence)
T105 / C114 (Sodium Oxide – X-Ray Fluorescence)
T105 / C114 (Sulfur Trioxide – X-Ray Fluorescence)
T105 / C114 (Titanium Dioxide – X-Ray Fluorescence)
T105 / C114 (Zinc Oxide – X-Ray Fluorescence)
Masonry - accredited since 10/1/2007
T106 / C109 (Compressive Strength of Hydraulic Cement Mortars (Using 2-in. Cube Specimens))
T137 / C185 (Air Content of Hydraulic Cement Mortar)
R115 / C305 (Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency)
M201 / C511 (Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the testing of Hydraulic Cements and Concretes)
C67 (Brick: Absorption)
C67 (Brick: Capping)
C67 (Brick: Compressive Strength)
C67 (Brick: Initial Rate of Absorption)
C67 (Brick: Measurement)
C67 (Brick: Specimen Preparation)
C140 (Concrete Masonry Units) (Sampling and Testing Concrete Masonry Units and Related Units)
C426 (Linear Drying Shrinkage of Concrete Masonry Units)
C780 (Annex 1) (Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry - Consistency by Cone Penetration)
C780 (Annex 4) (Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry - Mortar Aggregate Ratio)
C780 (Annex 6 - Cubes) (Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry - Compressive Strength of Cubes)
C780 (Annex 6 - Cylinders) (Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry - Compressive Strength of Cylinders)
C1019 (Sampling and Testing Grout)
C1262 (Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units)
C1314 (Compressive Strength of Masonry Prisms)
C1437 (Flow of Hydraulic Cement Mortar)
C1506 (Water Retention of Hydraulic Cement-Based Mortars and Plasters)
C1552 (Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing)
C1645 (Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units)
Iron and Steel - accredited since 11/13/2015
M31-T244 / A615-A370 (Carbon-Steel Bars, Deformed and Plain: Tension (Elongation))
M31-T244 / A615-A370 (Carbon-Steel Bars, Deformed and Plain: Tension (Ultimate Tensile Strength))
M31-T244 / A615-A370 (Carbon-Steel Bars, Deformed and Plain: Tension (Yield Strength))
M31-T285 / A615-E290 (Carbon-Steel Bars, Deformed and Plain: Bend Test)
Controlled Low Strength Material - accredited since 2/20/2020
D4832, D5971
Please note that our accreditations do not include an expiration date. An accreditation only expires when the laboratory fails to comply with our accreditation requirements.
* This information is only valid as of 10/27/2026. Please visit https://aashtoresource.org for current accreditation status.
|